Jaguar Mining announces significant, high grade intercepts near-mine at Pilar and commences growth exploration drilling at Turmalina
Thursday, Aug 17, 2017
  • Exploration success at Pilar includes a significant intercept grading 10.8 g/t Au over 29.3 m (ETW 22.5 m)
  • Ongoing cost reduction initiatives enable continued capital investment in high priority growth exploration programs

Jaguar Mining Inc. ("Jaguar" or the "Company") (TSX:JAG) today announced results from its investment in its near-mine high priority growth exploration drilling program, including 4 holes, involving 1,689 metres ("m") at the Company's emerging Pilar mine in Minas Gerais, Brazil. During the first half of 2017, the Company remained focused on reducing its cash costs, generating operating cash flow, and maintaining a disciplined approach to the allocation of sustaining capital which enabled the Company to continue deploying capital towards key growth exploration. The Company also announced it has successfully acquired a strategic Mineral Exploration License (the "License") over a prospective greenstone terrane adding approximately 15% to the Pilar Mine License footprint. At Turmalina, three diamond drill rigs commenced growth exploration drilling targeting projected down-plunge extensions, below current mining levels and infrastructure, on both Orebody A and Orebody C.

Pilar Growth Exploration Drilling Highlights and Key Intercepts

  • Completed a series of deep drill holes targeting the down-plunge continuity of the principal mineralized Banded Iron Formation Orebodies between Levels 11 to 16, up to approximately 350 m vertically below the current development and 250 m below the current Inferred Resources at the Pilar mine (refer to Figure #1).

  • Significant intercept grading 10.8 g/t Au over 29.3 m (estimated true width 22.5 m) reported in hole PPL449A (refer to Table #1). This intercept along with the additional highly significant drill intercepts confirms the expected continuity of high grade gold mineralization within the principal Orebody package down-plunge over a considerable distance.
  • Drilling successfully intersected deep extensions with the deepest mineralized interval in hole PPL449A intersecting well mineralized Banded Iron Formation between Levels 14 and 15, approximately 300 m vertically below the current deepest underground development at the mine.

  • Drill intercepts confirm an expected increase in thickness of the mineralization with the widest intercept in hole PPL449A also the deepest to-date.

  • Drill results provide the potential to add substantial new Inferred Resources at Pilar and include the following key intercepts:

Banded Iron Formation Orebodies:

  • Drill hole PPL449A intercepted 10.8 g/t Au over 29.3 m (ETW 22.5 m)
    • Including an intercept of 17.3 g/t Au over 10.2 m (ETW 7.8 m)
  • Drill hole PPL449A intercepted 4.6 g/t Au over 34.2 m (ETW 26.2 m)
  • Drill hole PPL449A intercepted 9.0 g/t Au over 7.6 m (ETW 7.0 m)
  • Drill hole PPL441 intercepted 6.8 g/t Au over 29.0 m (ETW 7.2 m)
  • Drill hole PPL441 intercepted 5.5 g/t Au over 6.5 m (ETW 6.4 m)
Rod Lamond, President and CEO of Jaguar Mining commented: "Our employees' tremendous efforts to reduce and control costs across the Company in the first half of 2017 has enabled the Company to continue its investment in key growth exploration projects at Pilar and Turmalina. This investment has created sustainable value as today's drill results demonstrate the expected continuity of high grade mineralized structures well beyond current mine plans. The increased grade and thickness of mineralization at depth will build confidence in the potential for adding substantial new resources to the Pilar mine and to significantly extend its mine life. Plans for additional drilling at Pilar are being finalized. We are also optimistic that the drill program commenced at Turmalina may deliver similar exploration success when we report drill results before year-end. Moving forward, we will continue to remain disciplined in deploying capital towards the highest priority targets across all of our operating mine sites."

Jon Hill, a senior Exploration Geologist and Jaguar´s newly appointed Senior Expert Advisor to the Management Committee commented: "Today's results confirm the presence of increased gold mineralization and identify opportunities for the extension of additional gold mineralization and an expanded drill program at Pilar. These results are very encouraging and we are pleased to have commenced additional near-mine drilling at Turmalina targeting Orebody A and Orebody C. While growth exploration has initially been focused on consolidation of the resource base and demonstrating long-term sustainable production at both the Pilar and flagship Turmalina operations, these latest positive results now allow management to move forward confidently with aggressive, but focused and disciplined, growth exploration programs within the Company's greater tenement portfolio."

New Strategic Land Position at Pilar Mine Concession

  • In July, the Company successfully acquired a new strategic exploration license contiguous to the Pilar Mine License package adding 436.62 hectares, or 15%, to the Pilar Mine License footprint. This area is underlain by prospective Archean greenstone geology including the same stratigraphic sequence and equivalent structural setting as the Pilar Mine Mineralized sequence (see Figure #2).
  • The newly acquired License was originally staked in 1981 and became publicly available on July 24, 2017 when it was awarded to Jaguar under the ordinance number 831.233/2017 by the Departamento Nacional de Produção Mineral ("DNPM"). 

Turmalina Mine

  • Commenced drilling in July at Turmalina with three diamond drills targeting down-plunge depth extensions to the high grade Orebody A at depth, to approximately 300 m below current development and resource limits, while also targeting extensions of Orebody C at shallower depths.
  • Orebody A drilling is being undertaken from a hanging wall development specifically prepared and completed for this program on Level 10-1. Drilling is intended to reach Levels 12 – 16, up to 420 m vertically below the current development and 300 m below the current Inferred Resources (refer to Figure #3).

  • At shallower levels, drilling will target projected down-plunge extensions to Orebody C which, once confirmed, will allow access for mining from existing infrastructure between Levels 4 and 10 (see Figure #4).

  • Regular updates on progress with results will be released over the coming months prior to reporting updated Mineral Reserves and Mineral Resources in March 2018.
Quality Control

Jaguar continues to use a quality-control program that includes insertion of blanks and commercial standards in order to ensure best practice in sampling and analysis.

HQ, NQ, and BQ size drill core is sawn in half with a diamond saw. Samples are selected for analysis in standard intervals according to geological characteristics such as lithology and hydrothermal alteration contents. All diamond drill hole collars are accurately surveyed using a Total Stations instrument and down-hole deviations are surveyed using non-magnetic equipment with Icefield Tools' Gyro Path® NSG equipment and SPT Stockholm Precision Tools with GyroMaster™ Solid State [North Seeker].

Mean grades are calculated using a variable lower grade cut-off (generally 0.5 g/t Au). No upper gold grade cut has been applied to the data. However, the requirement for assay top cutting will be assessed during future resource work.

Half of the sawed sample is forwarded to the analytical laboratory for analysis while the remaining half of the core is stored in a secure location. The drill core samples are transported in securely sealed bags and sent for physical preparation to the independent ALS Brasil (subsidiary of ALS Global) laboratory located in Vespasiano, Minas Gerais. The analysis is conducted at ALS Global's respective facilities (fire assay are conducted by ALS Global in Lima, Peru and multi-elementary analysis are conducted by ALS Global in Vancouver). ALS have accreditation in global management system that meets all requirements of international standards ISO/IEC 17025:2005 and ISO 9001:2015. All major ALS geochemistry analytical laboratories are accredited to ISO/IEC 17025:2005 for specific analytical procedures.

For a complete description of Jaguar's sample preparation, analytical methods, and QA/QC procedures, please refer to the "Technical Report on the Roça Grande and Pilar Operations, Minas Gerais State, Brazil", a copy of which is available on the Company's SEDAR profile at

The Iron Quadrangle

The Iron Quadrangle has been an area of mineral exploration dating back to the 16th century. The discovery in 1699-1701 of gold contaminated with iron and platinum-group metals in the southeastern corner of the Iron Quadrangle gave rise to the name of the town Ouro Preto (Black Gold). The Iron Quadrangle contains world-class multi-million ounce gold deposits such as Morro Velho, Cuiabá, and São Bento. Jaguar holds the second largest gold land position in the Iron Quadrangle with just over 25,000 hectares.

About Jaguar Mining Inc.

Jaguar Mining Inc. is a Canadian-listed junior gold mining, development, and exploration company operating in Brazil with three gold mining complexes, and a large land package with significant upside exploration potential from mineral claims covering an area of approximately 192,000 hectares. The Company's principal operating assets are located in the Iron Quadrangle, a prolific greenstone belt in the state of Minas Gerais and include the Turmalina Gold Mine Complex and Caeté Gold Mine Complex, which combined produce more than 95,000 ounces of gold annually. The Company also owns the Paciência Gold Mine Complex, which has been on care and maintenance since 2012.

For more information, please visit:

Featured Profile

Featured Videos

Featured Case Studies